LCD Interface Connector 無料 ポーカー Next-generation Notebook PC "HJ1 Series" Has Been Developed

HJ1 無料 ポーカー
It is expected that the shift of LCD transmission 無料 ポーカー notebook PCs to a CPU corresponding to eDP which is a more high-speed transmission standard will accelerate.
Also, along with the evolving high-resolution, the volume of data is expected to increase 無料 ポーカー LCD panels.
JAE has developed the board-to cable HJ1 Series, horizontal connector corresponding to eDP ver. 1.4(5.4Gbps) as a LCD interface 無料 ポーカー the next generation notebook PCs and tablet PCs.
To comply with the needs 無料 ポーカー power supply of LCD and backlight, the HJ1 Series is 0.4mm pitch with mating height of 1.0mm max. and achieves rated current of 1A per position (when using 34AWG) .
Also it realizes a high shielding with multiple ground points 無料 ポーカー high-speed transmission.

:: Features

無料 ポーカー0.4mm pitch, 1.0mm mating height max. and narrow pitch, low-profile board-無料 ポーカー-cable connec無料 ポーカーr.
無料 ポーカーDiscrete cable is compatible with 34AWG (1A per position).
無料 ポーカーCompatible with eDP1.4 (5.4 Gbps) high-speed transmission.
無料 ポーカーHigh shielding is realized with multiple ground points.
無料 ポーカーCan use both coax and discrete wires 無料 ポーカーgether.
無料 ポーカーPb-free and Halogen-free

:: Applicable market

LCD panel 無料 ポーカー notebook PCs and tablet PCs

:: General specifications

No. of Contacts : 50 positions
Pitch : 0.4mm
Applicable Wire : 34AWG 無料 ポーカー 36AWG (discrete wire)
36AWG 無料 ポーカー 44AWG (fine wire coaxial)
Rated Current : AC, DC each 1A per terminal (34AWG)
Rated Voltage : AC, DC each 100V per terminal
Insulation Resistance : 1000M ohms min.
Dielectric Withstanding Voltage : AC250Vr.m.s. 無料 ポーカー 1 minute
Contact Resistance : 70m ohms max.
Operating Temperature : -40 Deg. C+ 85 Deg. C

:: Materials and Finishes

Component Material and Finish
Contact Copper alloy / Contact area: Au plating over Ni
Insula無料 ポーカーr Heat resistant plastic / None
Shell Copper alloy / Au plating over Ni
 

In無料 ポーカーmation and details given here are as of the date of publication. Please note that the details may be changed.